How To Set Up A Ps3 Internet Connection Wireless

Connecting your PlayStation® 3 (PS3™) to the wireless network allows you to gain admission to online services such equally PlayStation® Network and PlayStation® Store, as well as access shared media files and devices in your network.

This article will assist in setting up the PS3 to wirelessly connect to the Cyberspace.

Note:  This article assumes that yous are using a North American PS3.  If you're using an Asian version, the confirm (10) and cancel (O) buttons' functionality may be reversed.

IMPORTANT:  Brand sure that no Internet cable is connected to your PS3's Ethernet port, otherwise the console might attempt to configure its network settings through a wired connexion.  For instructions on how to connect your console via the Ethernet cable, click here .

Step one:
Power on your PS3 and then go to Settings > Network Settings.

Step 2:
Gyre downwards to make sure that the Internet Connectedness is set up to Enabled.

Step three:
Scroll downward to Internet Connection Settings and printing the Ten push on the controller.

NOTE:  If a prompt appears, press X to begin setup.  You lot will be asunder from any active Internet connections.

Step 4:
Select Easy and press right.

Stride 5:
Select Wireless and press right.

Footstep half dozen:
Under WLAN Settings, select Browse so press right .  Your PS3 device will begin to search for available networks.

Step 7:
In one case the list of active network names (SSID) appears, select your network so printing X.

Footstep 8:
Confirm the correct SSID and press right on your D-pad.

Step 9:
The PS3 automatically highlights the security mode it detects from your router.  Press right to proceed to the next screen.

Stride x:
If yous selected a security style, press X to begin entering the network's passphrase.  You may use the onscreen keypad or any compatible keyboard.  Press START or [Enter] after entering the passphrase.

QUICK TIP:Press right on the D-pad to review your settings.

  WPA™ keys are case-sensitive (Notation: abc is unlike from ABC).  WEP keys are hexadecimal (0-9 and a-f) characters and are non case-sensitive.

Step 11:
Ostend the correct settings from the Settings List then press X.

Once your settings have been saved, press 10 once again to test your connection.

Testing the connection usually takes less than a infinitesimal.  If you lot configured the settings correctly and Internet connection is available, the tests should show Succeeded.

If the examination fails, attempt again and make certain that your settings on the panel match the ones on the router.

Related Article:

Connecting your Playstation®iv to a wireless network

Related Videos:

Connecting your Xbox 360 to the Wireless Network (VIDEO)
Checking the wireless settings of your router (VIDEO)

How To Set Up A Ps3 Internet Connection Wireless,

Source: https://www.belkin.com/us/support-article?articleNum=8255

Posted by: meyerwhispectilly.blogspot.com

Share this post